77
Using the PC-80 as a MIDI controller keyboard
fig.util*
1
Simultaneously hold down the
MIDI CH
button and
PGM CHANGE
button for a few moments.
The display will indicate “UTL
”
and you will be in Utility mode.
fig.pnc
2
Press the keyboard key marked
[SPLIT POINT]
.
The indication “SPL
”
starts blinking in the display.
3
Press the
ENTER button
.
4
Press the keyboard key that you want to specify as the Lower split point.
fig.enter
5
Press the
ENTER button
.
6
Press the keyboard key that you want to specify as the Upper split point.
7
Press the
ENTER button
.
* If you press a different button without pressing the
ENTER button
, the setting will be cancelled.
The
split points
have now been set.
* In Split mode, the MIDI channels used for transmission will be the MIDI channels specified for Upper mode
and Lower mode. (
➔
“Setting the MIDI transmit channel”
(p. 62))
Setting the split points

Split points

In Split mode, the keyboard is divided into
Lower and Upper regions, allowing you to
play separate sounds in each region.
The Lower region extends from the leftmost
key to the key you specify.
The Upper region extends from the rightmost
key to the key you specify.
The keys that specify these regions are called
the “split points.”
*“Combining two sounds (Split)” (p. 37)
Split point
Split point
Upper sound
Upper sound
Lower sound
Lower sound
C7C6C5C4C2C2
C7C6C5C4C2C2
C7C6C5C4C2C2
C7C6C5C4C2C2
213, 5, 7 4, 6
PC-80_e.book 77 ページ ２００５年１１月１０日　木曜日　午前１１時３４分