Model Ei105C Optical
Technical Specification
Sensor: | Optical, uses light scatter from |
| smoke particles |
Sensitivity:Complies with BS 5446 Part 1: 2000
Airspeed:Essentially immune to the effect of airspeed.
Button Test: Simulates the effect of smoke and checks chamber, electronics and horn.
Supply Voltage: | 9V battery |
Alarm: | |
| in unit |
Alarm Sound Output: 85dB (minimum) at 3m
Temperature Range: | 0 to 40°C |
Humidity Range: | 0% to 90% Relative Humidity |
Fixing: | Screw fixings supplied |
Plastic material: | UL94HB flame retardant |
Dimensions: | 145 x 120 x 45 mm |
Weight: | 204 grams |
Warranty: | 5 year (limited) warranty |
Approvals: | Kitemarked to BS EN 14604:2000, |
| CE Approved |
Specifications are subject to change
Installation & Placement
Alarms should be placed in accordance with the general guidelines shown in the diagram above. These recommendations are based on the problem of areas of “dead air” close to corners of rooms and apexes of ceilings, which could result in the prevention of smoke reaching the smoke detector
Please consult the Instruction Leaflet supplied with the Ei105C for detailed instructions as to how to correctly install and position the smoke detector
Important Precaution:
Do not install the actual smoke/heat alarm itself in new or renovated buildings until all work is completed (including floor coverings) and the building has been fully cleaned. (Excessive dust and debris from building work can contaminate the smoke chamber and cause problems, and it will also invalidate the guarantee). If it must be installed, cover it completely, particularly around the edges, with a dust cover (eg. a plastic bag), until all cleaning is finished..
Shannon Free Zone, Shannon, Co. Clare, Ireland.
Ph.+353 61 471277 Fx.+353 61 471053
Email. eielectronics@eiltd.ie
Web: www.eielectronics.com
E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice. | Ei105C DataSht RevB |
|
|
