Model Ei 105R Optical
High sensitivity – responds to all standard fires Senses smoke using the light scatter principle, giving a quick response to visible smouldering fires
Supply voltage 10.2 to 14 volts
Relay Contacts (Normally open and closed) Interconnect up to 12 alarms
Test button
Kitemarked to
Product Description | Operation |
The Ei105R is an Optical Smoke Alarm that that is designed to operate with suitable 12 volt control panels and to provide a loud local alarm.
Optical smoke alarms use the light scatter principle to detect smoke particles entering the optical chamber within the alarm.
Optical sensing technology gives a rapid response to visible smouldering fires.
The Ei105R is easily installed and comes supplied with all necessary screw fixings.
Relay contacts (normally open and closed supplied) are available for triggering the panel itself and its associated ancillary products, such as extra loud sirens, magnetic door holders, etc.
The alarms can be interconnected so that when one alarm senses fire, all the units located throughout the premises sound.
The smoke detector will activate the built in sounder upon sensing smoke particles
The smoke detector will automatically reset itself and silence the sounder when smoke particles are no longer present in the sensing chamber
The built in sounder will provide a minimum sound output of 85dB at 3m
In “Test” button will perform a self test and sound the horn (it may take up to 10 seconds)
Interconnect up to 12 other alarms (9V ionisation, optical or heat) when one senses smoke, all alarm. Helps ensure warning will be heard throughout the house
Shannon Free Zone, Shannon, Co. Clare, Ireland.
Ph.+353 61 471277 Fx.+353 61 471053
Email. eielectronics@eiltd.ie
Web: www.eielectronics.com
E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice. | Ei105R DataSht RevA |