Ei Electronics manual Model Ei105R Optical, Technical Specification, Installation & Placement

Models: Ei105R

1 2
Download 2 pages 47.33 Kb
Page 2
Image 2
Model Ei105R Optical

Model Ei105R Optical

Technical Specification

SensorOptical, uses light scatter from smoke particles

Sensitivity:Complies with BS 5446 1: 2000

Source:Contains no radioactive material

Airspeed:Essentially immune to the effect of airspeed.

Button Test:Simulates the effect of smoke and checks chamber, electronics and horn.

Ambient Light: Chamber housing design overcomes problems with stray light.

Supply Voltage:

12V control panel

Alarm:

Piezoelectric horn

 

in unit

Alarm Sound Output: 85dB (minimum) at 3m

Temperature Range:

0 to 40°C

Humidity Range:

0% to 90% Relative Humidity

Fixing:

Screw fixings supplied

Plastic material:

UL94HB flame retardant

Dimensions:

145 x 120 x 45 mm

Weight:

181 grams

Warranty:

5 year (limited) warranty

Approvals:

Kitemarked to BS5446-1:2000, CE

 

Approved

Specifications are subject to change

Installation & Placement

Alarms should be placed in accordance with the general guidelines shown in the diagram above. These recommendations are based on the problem of areas of “dead air” close to corners of rooms and apexes of ceilings, which could result in the prevention of smoke reaching the smoke detector

Please consult the Instruction Leaflet supplied with the Ei105R for detailed instructions as to how to correctly install and position the smoke detector

Important Precaution:

Do not install the actual smoke/heat alarm itself in new or renovated buildings until all work is completed (including floor coverings) and the building has been fully cleaned. (Excessive dust and debris from building work can contaminate the smoke chamber and cause problems, and it will also invalidate the guarantee). If it must be installed, cover it completely, particularly around the edges, with a dust cover (eg. a plastic bag), until all cleaning is finished..

Shannon Free Zone, Shannon, Co. Clare, Ireland.

Ph.+353 61 471277 Fx.+353 61 471053

Email. eielectronics@eiltd.ie

Web: www.eielectronics.com

E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice.

Ei105R DataSht RevA

Page 2
Image 2
Ei Electronics manual Model Ei105R Optical, Technical Specification, Installation & Placement