B16009-R0-160RC SERIES-U&C 17/1/07 11:13 AM Page 11

13. TROUBLESHOOTING (CONTINUED)

beeps, a fault may exist. Disconnect the mains first and replace the unit - see “ALARM REMOVAL” section on page 2.

(2)Ionisation Smoke Alarms (Ei141/161RC) and Heat Alarms (Ei144/164RC) give two beeps 10 minutes after the test/hush button is pressed.

(3)If an Optical unit (Ei146/166RC) beeps without the red light flashing at the same time, the chamber is defective. Clean the chamber.

4. INTERCONNECTED ALARMS DO NOT ALL SOUND:

(1)Hold test button for 10 seconds after first alarm has sounded to ensure signal is transmitted to all units.

(2)One or more of the connections may not be correctly connected. We recommend you consult a qualified electrician.

Aico Ltd. Mile End Business Park, Maesbury Rd, Oswestry,

Shropshire SY10 8NN, U.K. Tel: 0870 758 4000

www.aico.co.uk

Ei Electronics. Shannon, Co Clare, Ireland. Tel: 061 471277

www.eielectronics.com

INDEX

1. REGULAR CHECKS

1

2. ALARM REMOVAL

2

3. IMPORTANT INFORMATION

3

4. CHANGING THE BATTERY

4

5. TESTING & MAINTAINING YOUR ALARM

4

6. CLEANING YOUR ALARM

6

7. NUISANCE ALARMS

7

8. IMPORTANT SAFEGUARDS

8

9. PLANNING YOUR ESCAPE ROUTE

8

10. ALARM CONTROL

10

11. GETTING YOUR ALARM SERVICED

10

12. 5 YEAR GUARANTEE

10

13. TROUBLESHOOTING

11

12

Page 11
Image 11
Ei Electronics B16009-R0-160RC Series, Ei166RC, Ei164RC manual Index, Interconnected Alarms do not ALL Sound