Regulatory information for Australia
•This customer equipment shall only be installed in a PC that requires the use of a tool to gain access to internal parts (e.g. this customer equipment must not be installed in a PC with a ‘flip lid’).
•Proper installation of the Eiconcard C2x card requires that it is screwed to the metal backplate of the computer. This ensures proper grounding, which is necessary for safety purposes.
•This customer equipment may only be installed in host equipment where there is at least 2 mm of air gap between the customer equipment and adjacent boards (PCBs).
•Only ACA permitted line cord set(s) or made from ACA certified compo- nents shall be used as replacements with this customer equipment.
Eiconcard C2x
Warning: This customer equipment is to be installed and maintained by service personnel as defined by AS/NZS 3260 Clause 1.2.14.3 Service Personnel. It may be hazardous if your computer is not properly plugged in and grounded.
22 | Regulatory information for Australia |
