Eiki LC-NB4S owner manual Video Input

VIDEO INPUT

SELECTING INPUT SOURCE

DIRECT OPERATION

Choose Video by pressing INPUT button on Top Control or on Remote Control Unit.

If projector cannot reproduce proper video source, select correct input source through MENU OPERATION (see below).

INPUT button

Video

Computer

		MENU OPERATION
1	Press MENU button and ON-SCREEN MENU will appear. Press
	POINT LEFT/RIGHT button to move a red frame pointer to
	INPUT Menu icon.
2	Press POINT DOWN button to move a red arrow pointer to
	Video and then press SELECT button. Source Select Menu will
	appear.
3	Move a pointer to the source that you want to select and then
	press SELECT button.
		Projector automatically detects incoming Video signal,
	Auto
		and adjusts itself to optimize its performance.

•When both VIDEO jack and S-VIDEO jack are connected, S-VIDEO jack has priority over VIDEO jack.

•When both Y-Pb/Cb-Pr/Cr jacks and S-VIDEO jack are connected, Y-Pb/Cb-Pr/Cr jacks have priority over S- VIDEO jack.

Video	When video input signal is connected to VIDEO jack,
	select Video.
	When video input signal is connected to S-VIDEO jack,
S-Video
	select S-Video.

Y,Pb/Cb,Pr/Cr When video input signal is connected to Y-Pb/Cb- Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.

INPUT MENU

Move a pointer to Video and press SELECT button.

VIDEO

Source Select Menu (VIDEO)

Move a pointer to the source and press SELECT button.

30