Setting

Ceiling

When this function is “On,” the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling mounting the projector.

Rear

When this function is “On,” the picture is left/right reversed. This function is used to project the image to a rear projection screen.

Terminal

The COMPUTER IN 2/COMPONENT IN/MONITOR OUT terminal on the back of the projector can be used as computer input or monitor output by switching Terminal with the Point Left/Right button.

To use the terminal as computer input, Component video input, or RGB Scart 21-Pin Video input, select Computer 2. To use the terminal as monitor out, select Monitor out.

Terminal cannot be switched into Monitor out after selecting Computer 2. In this case, select other input source such as Computer 1 or Video, and you will select Terminal.

Standby mode

This function is available when using Multi Card Director optionally supplied, and it reduces standby energy when selecting Eco.

Eco

···· reduces standby energy.

Normal ···· consumes normal standby energy.

Power management

For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the input signal is interrupted and no button is pressed for 30 seconds or more.

When the input signal is interrupted and no button is pressed for 30 seconds or more, the timer display with the message "No signal" appears on the screen. The count-down starts for the time to have been set. The count-down time can be set between 1 and 30 minutes.

When the count-down time has elapsed, the lamp will be turned off to cool itself down. The POWER indicator is flashing red during this cooling-off period. The next performance depends on setting as follows.

Ready ······ When the lamp has been fully cooled down, the POWER indicator changes to green flashing. In this condition, the projection lamp will be turned on if the input signal is reconnected or any button on the top control or remote control is pressed.

Shutdown···· When the lamp has been fully cooled down, the power will be turned off.

Off ···············The Power management function is canceled.

On start

When this function is “On,” the projector is automatically turned on just by connecting the AC power cord to a wall outlet.

NOTE

Be sure to turn the projector off properly (see “Turning Off the Projector” on page 19). If the projector is turned off in the wrong steps, the On start function does not operate properly.

Ceiling

Rear

Standby mode

Press the SELECT button at this icon to display other items.

Power management

Time left until Lamp

off

Press the SELECT button at Power management and this box appears. Choose one of three settings with the Point Left/Right button, and go to the timer with the Point Up/Down button and set time with the Point Left/Right but- ton.

39

Page 39
Image 39
Eiki LC-XB15 owner manual Setting

LC-XB15 specifications

The Eiki LC-XB15 is a versatile and reliable LCD projector that caters to various presentation needs, making it an excellent choice for educational institutions, corporate environments, and event venues. With its compact design and robust features, the LC-XB15 ensures that presentations are both impactful and engaging.

One of the standout features of the Eiki LC-XB15 is its impressive brightness rating of 3,500 lumens, allowing it to deliver clear and vibrant images, even in well-lit settings. This makes it particularly suitable for larger rooms or environments where ambient light is a factor. The projector's native XGA resolution of 1024 x 768 pixels ensures that text and images are sharp and easy to read, enhancing the overall viewer experience.

In terms of technology, the LC-XB15 employs advanced 3LCD technology, which provides excellent color accuracy and vibrant image quality. With a color brightness of 3,500 lumens, the projector produces vivid colors that maintain their integrity even in challenging lighting conditions. The projector also boasts a contrast ratio of 3,000:1, providing deeper blacks and more defined color palettes, which adds depth to presentations.

Connectivity is another strength of the Eiki LC-XB15. It offers multiple input options, including HDMI, VGA, and a composite video port, allowing for flexible connection to various devices, such as laptops, DVD players, and document cameras. The projector is also equipped with an RS-232 port for remote control and integration into more extensive AV systems, making it a practical choice for installation environments.

The Eiki LC-XB15 is designed for ease of use, featuring a straightforward user interface and straightforward setup procedures. The lens offers a 1.2x optical zoom, enabling users to adjust image sizes without moving the projector. The built-in speaker delivers decent audio quality for smaller presentations, eliminating the need for additional sound equipment in less critical settings.

Additionally, the LC-XB15 has a long lamp life of approximately 5,000 hours in standard mode, which can be extended further in eco mode. This feature not only reduces maintenance costs but also minimizes downtime, ensuring consistent use for various applications.

In conclusion, the Eiki LC-XB15 stands out as a reliable and feature-rich projector that meets the needs of a diverse user base. Its combination of brightness, color accuracy, and user-friendly design makes it a valuable tool for enhancing presentations in any setting. Whether for educational purposes, business meetings, or events, the LC-XB15 proves to be an effective solution for impactful visual communication.