Eiki LC-XB15 Video Input, Input Source Selection Component, RGB Scart 21-Pin, Computer

Video Input

Input Source Selection (Component, RGB Scart 21-Pin)

Direct Operation

Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through menu operation as described below.

INPUT button

Computer 1

Computer 2 ✽

Video

COMPUTER button

Computer 1

Computer 2 ✽

✽Computer 2 is not displayed when the COMPUTER IN 2/COMPONENT IN/MONITOR OUT terminal is used as Monitor out.

Menu Operation

1	Press the MENU button and the On-Screen Menu will appear. Input Menu
	Press the Point Left/Right button to move the red frame pointer
	to the Input Menu icon.
2	Press the Point Down button to move the red arrow pointer to
	Computer 2 (Only the Computer 1 is displayed when Monitor

out is selected in the Setting Menu.), and then press the SELECT button. The Source Select Menu will appear.

Input Menu icon

Move the pointer (red arrow) to Computer 2 and press the SELECT button.

3	Move the pointer to the correct input source and then press the
	SELECT button.
		When the input source is coming from video
Component
		equipment connected to the COMPUTER IN
		2/COMPONENT IN/MONITOR OUT terminal with a
		Component-VGA Cable, select Component.

Computer

2

Source Select Menu

Move the pointer to Component or RGB (Scart ) and press the SELECT but- ton.

RGB (Scart)

When the input source is coming from video equipment connected to the COMPUTER IN 2/COMPONENT IN/MONITOR OUT terminal with a Scart-VGA Cable, select RGB (Scart).

NOTE

●Component-VGA Cable and Scart-VGA Cable are optionally supplied. See page 53 for order.

33