Eiki LC-XG300L Part Names and Functions, Rear Terminal, q5 BNC INPUT JACKS, rVIDEO INPUT JACK

Part Names and Functions

Rear Terminal

qwe

r

t

o i u y

q5 BNC INPUT JACKS

Connect the component or composite video output signal from video equipment to VIDEO/Y, Cb/Pb, and Cr/Pr jacks or connect the computer output signal (5 BNC Type [Green, Blue, Red, Horiz. Sync, and Vert. Sync.]) to G, B, R, H/V, and V jacks (pp.22–24).

wCOMPUTER INPUT TERMINAL (ANALOG) Connect the computer (or RGB scart) output signal to this terminal (pp.22, 24).

eCOMPUTER INPUT TERMINAL (DIGITAL) Connect the computer output signal (Digital DVI-D type) to this terminal. The HD (HDCP compatible) signal can also be connected (pp.22, 24).

rVIDEO INPUT JACK

Connect the composite video output signal from video equipment to this jack (p.23).

tUSB CONNECTOR (Series B)

Use this connector when controlling a computer with the remote control of the projector. Connect the USB terminal of your computer to this connector with the supplied USB cable (p.22).

yS-VIDEO INPUT JACK

Connect the S-VIDEO output signal from video equipment to this jack (p.23).

uAUDIO 3 JACKS (L(MONO)/R)

Connect the audio output signal from video equipment connected to r or y to these jacks (p.23). For a mono audio signal (a single audio jack), connect to the Mono input jack.

iAUDIO 2 JACK

Connect the audio output (stereo) signal from a computer or video equipment connected to q to this jack (pp.22–24).

oAUDIO 1 JACK

Connect the audio output (stereo) signal from a computer or video equipment connected to w or e to this jack (pp.22, 24).

11