Changing the projector location

Change the projector location to the location where the projector is installed. E.g. “Meeting Room 3” or “Building 1, Level 2, Room 17”. Click theChange button to save the new location.

You can close the window by clicking on the Close Tool button.

Changing the IP address

The NPC-1 device is shipped with the following default private IP address: 192.168.0.99

IP addresses of the form 192.168.xxx.xxx are private in the sense that they are never assigned by ISPs. Applications of NPC-1 that require sending data over a public network, such as the Internet, require providing the NPC-1 with a valid public IP address. Public IP addresses are generally purchased or leased from a local ISP.

Change the IP address of the NPC-1 to a valid IP address. If you are unsure about changing the IP address please ask your system administrator. Click the Change button to save the new IP address.

Perform a new search by clicking on the Search button to see the updated IP address on the network.

- 11 -