Eiki NPC-1 Reading the Status of a Projector

Reading the Status of a Projector

Am I connected?

To get a status reply from your projector you have to be connected to a projector. If your are not connected to a projector the Get Status button in the Projector Status window is deactivated.

You can close the Projector Status window by clicking the Close Tool button.

Understanding the status reply

Click on the Get Status button to receive the current projector status. The NetControl software requests all status data from the projector in real time. You can be sure that all data are up-to-date.

Request	Possible Reply
Status	Shows the current working condition of the projector.
Input Mode	Tells the user the active input source.
Lamp Time	This data show the hours of lamp usage.
Setting	Returns the actual picture setting (e.g. up-side-down).
Temperature	Temperature sensors return the actual temperature in
	the projector.
Lamp Mode	If more than 1 lamp is used this data shows information
	about the lamps.
Signal	Returns the actual signal type.
A/V Status	Returns actual status of video/audio mute functions.

- 17 -