1. Preparation
Installing the USB Memory
Install the optionally available USB memory to the USB terminal on the right side of the projector. When installing, confirm the direction of the plug not to damage the terminal.
Use optionally available our USB memory
The USB terminal is compatible with USB memory formatted with FAT16 or FAT32.
It is not compatible with other formats. Please note that when you format the USB memory
|
|
| USB lamp* |
| USB |
| * The lamp blinks during access |
|
|
| to the USB memory. While |
USB terminal |
|
| the lamp is blinking, do not |
| USB memory* | pull out the USB memory. It | |
|
| may cause data corruption in | |
|
| Blink during access | |
|
| the USB memory. | |
|
|
|
Caution on Installation and Removal of the USB Memory
Please note following points to install and remove the USB memory.
The USB memory will be blinking when it is installed to the projector or while the projector is reading out the data. Do not remove the USB memory while it is blinking.
Do not install and remove the USB memory frequently. Remove the USB memory at least 5 seconds after installation. And install at least 5 seconds after removal. While installing or removing the USB memory, the projector is in switching period for those operation.
Back up your important data
Back up your important USB memory data to the other media (Disk, memory, or tape.) We will not hold any responsibility for the data loss or data corruption.
Caution on Handling and Storing the USB Memory
-Do not put USB memory or its cap within close reach of children. Swallowing them may cause suffocation. - If the smoke or questionable odor rise, turn off the peripheral equipment and contact your dealer. - Do not put water, chemical or oil to the USB memory. It may cause short out or fire. - Do not put foreign objects or put metal objects to the USB terminal. Static electricity may cause data loss or data corruption. - Do not remove the USB memory from the computer or the projector while the USB memory is reading out or writing the data. It may cause data loss or data corruption. - Do not store the USB memory where high temperature, humid or dusty place or magnetized items are around.
Specifications of USB memory
Interface / Capacity | USB2.0/1.1 / 256MB | |
|
| |
Operating Voltage | DC5V | |
|
| |
Operating Temperature / Humidity | ||
|
| |
Dimension(Including the cap) | 71.5(Length)/17(Width)/10(Height)mm | |
Compatible OS | Windows XP/Windows2000 Professional | |
Windows Me | ||
| ||
|
|
6
