Eizo CG222W 2-2. Making Use of USB (Universal Serial Bus)

10

2. Installation

2-2. Making Use of USB (Universal Serial Bus)

This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC

or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily

connected.

Required system environment

• PC equipped with USB ports or another USB hub connected to the USB compliant PC

• Windows 2000/XP/Vista // Mac OS 9.2.2/Mac OS X 10.2 or later

• USB Cable (MD-C93, enclosed)

Note

• The USB hub function may not work properly depending on the PC or peripherals. Please consult the

manufacturer of each device about the USB support.

• Using the USB Rev. 2.0 compatible PC or peripherals is recommended.

• If the monitor is in the power saving mode, or if the monitor is connected to the power outlet with the

monitor turned off, all the devices connected to the USB ports (upstream and downstream) work.

Therefore, power consumption of the monitor varies with connected devices even in the power saving

mode.

• The followings are procedures for the Windows 2000/XP/Vista and Mac OS.

Connecting to the USB HUB

1

Connect the monitor to the PC with the signal cable ﬁrst, then turn on the PC.

2

Connect the upstream port of the monitor to the downstream port of the

USBcompliant PC or another hub by using the USB cable.

After connecting the USB cable, the USB function can be set up automatically.

3

After setting up, the monitor's USB hub is available for connecting USB

compliantperipherals to the downstream ports of the monitor.

Downstream

Upstream

Contents

Main Important The latest User's Manual is available for download from our site: http://www.eizo.com Page Notice for this monitor Page 1. Introduction 1-1. Features 1-2. Buttons and Indicators 14 5 6 7 83 1-3. Utility Disk Disk contents and software overview To use ColorNavigator 2. Installation 2-1. Connecting Two PCs to the Monitor Connection examples Selecting input signal Page 2-2. Making Use of USB (Universal Serial Bus) 3. Screen Adjustment and Settings 3-1. Basic Operation and Functions Entering the Adjustment menu Making Adjustments and Settings Exiting the Adjustment menu Functions 3-2. Screen Adjustment Analog Input Adjustment Procedure Perform the auto size adjustment. Prepare the display pattern for the analog display adjustment. Windows Perform the auto size adjustment again with the analog screen adjustment pattern displayed. Adjust by using <Screen> menu in the Adjustment menu Adjust the output signal range (Dynamic Range) of the signal. 3-3. Color Adjustment Simple adjustment [FineContrast mode] To select FineContrast mode FineContrast Mode Color Adjustment of the Mode Settings Advanced Adjustments [Adjustment menu] Adjustment Items 3. Screen Adjustment and Settings Adjustment Contents Menu Function Descriptions Adjustable range Note 3-4. Power-save Setup Analog Input [Power Saving System] Digital Input [Power Saving System] 3-5. Off Timer 3-6. Locking the settings [How to lock] [How to unlock] 3-7. Power Indicator Setting 3-8. Automatic brightness adjustment 3-9. Displaying Lower Resolutions Enlarge the screen size when displaying a low resolution. Smooth the blurred texts of the enlarged screen. Set the brightness of the black area surrounding the displayed image. 3-10. Setting the orientation of the Adjustment menu 3-11. EIZO Logo Appearing Function [To undisplay] [To display] 4.Troubleshooting Page Page 5. Reference 5-1. Attaching an arm Setup Procedure Lay the LCD monitor down. Do not scratch the panel. Remove the tilt stand by loosening the screws. 5-2. Specications Default settings Beeper settings Dimensions uinit: mm (inch) 513(20.2) 229(9) 151(5.9) 45.6(1.8) Pin Assignment DVI-I Connector Pin No. Signal Pin No. Signal Pin No. Signal USB Port No. Signal Remarks 5-3. Glossary Page 6. APPENDIX/ANHANG/ANNEXE 6. APPENDIX/ANHANG/ANNEXE Page For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity Canadian Notice