Eizo CG222W 5. Reference

5. Reference

5. Reference

5-1. Attaching an arm

The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm stand to the

LCD monitor.

Note

• If you will use the arm or stand of other manufacturers, conﬁrm the followings to the manufacturers

before selecting.

- Hole spacing on the arm mounting

100 mm x 100 mm (VESA compliant)

- Supportable Weight: Total weight of the monitor (without stand) and attaching equipment such

as a cable

- TÜV/GS approved arm or stand

• Please connect cables after attaching an arm stand.

Setup Procedure

Lay the LCD monitor down. Do not scratch the panel.

Remove the tilt stand by loosening the screws.

Unscrew the four screws securing the unit and the satand with the screwdriver.

Attach an arm stand to the LCD monitor securely.

Secure the monitor to the arm or stand using the screws speciﬁed in the user's manual of the arm

or stand.

Contents

Main Important The latest User's Manual is available for download from our site: http://www.eizo.com Page Notice for this monitor Page 1. Introduction 1-1. Features 1-2. Buttons and Indicators 14 5 6 7 83 1-3. Utility Disk Disk contents and software overview To use ColorNavigator 2. Installation 2-1. Connecting Two PCs to the Monitor Connection examples Selecting input signal Page 2-2. Making Use of USB (Universal Serial Bus) 3. Screen Adjustment and Settings 3-1. Basic Operation and Functions Entering the Adjustment menu Making Adjustments and Settings Exiting the Adjustment menu Functions 3-2. Screen Adjustment Analog Input Adjustment Procedure Perform the auto size adjustment. Prepare the display pattern for the analog display adjustment. Windows Perform the auto size adjustment again with the analog screen adjustment pattern displayed. Adjust by using <Screen> menu in the Adjustment menu Adjust the output signal range (Dynamic Range) of the signal. 3-3. Color Adjustment Simple adjustment [FineContrast mode] To select FineContrast mode FineContrast Mode Color Adjustment of the Mode Settings Advanced Adjustments [Adjustment menu] Adjustment Items 3. Screen Adjustment and Settings Adjustment Contents Menu Function Descriptions Adjustable range Note 3-4. Power-save Setup Analog Input [Power Saving System] Digital Input [Power Saving System] 3-5. Off Timer 3-6. Locking the settings [How to lock] [How to unlock] 3-7. Power Indicator Setting 3-8. Automatic brightness adjustment 3-9. Displaying Lower Resolutions Enlarge the screen size when displaying a low resolution. Smooth the blurred texts of the enlarged screen. Set the brightness of the black area surrounding the displayed image. 3-10. Setting the orientation of the Adjustment menu 3-11. EIZO Logo Appearing Function [To undisplay] [To display] 4.Troubleshooting Page Page 5. Reference 5-1. Attaching an arm Setup Procedure Lay the LCD monitor down. Do not scratch the panel. Remove the tilt stand by loosening the screws. 5-2. Specications Default settings Beeper settings Dimensions uinit: mm (inch) 513(20.2) 229(9) 151(5.9) 45.6(1.8) Pin Assignment DVI-I Connector Pin No. Signal Pin No. Signal Pin No. Signal USB Port No. Signal Remarks 5-3. Glossary Page 6. APPENDIX/ANHANG/ANNEXE 6. APPENDIX/ANHANG/ANNEXE Page For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity Canadian Notice