32 2 ADJUSTMENTS & SETTINGS USING THE SCREENMANAGER
Function
The monitor will not detect signals
automatically in this mode. Select the
active input by pressing the input signal
selection button on the monitor’s front
panel.
· The Input Priority function does not
automatically reactivate when the monitor has
been in the power saving mode.
· The Input selection button on the front panel can
be used to select either D-Sub or BNC as the
active input at any time.
Manual
Beep turns: on/off the beeper

If the beepr is ON, the monitor will generate

beep signals as shown below. If the beeper is

OFF, the monitor will not beep.

· ScreenManager item selected.
· ScreenManager parameter
adjusted to minimum or
maximum limit.
· BNC/D-Sub selection button
pressed.
· AUTO-SIZING button pressed.
· ScreenManager data-save
executed.
· Monitor not connected correctly.
· PC turned off.
· Monitor received unsupported
signal fequency.
· Monitor is in the advance notice
mode of the Off Timer. The
monitor will be in the Off Timer
Mode within 15 minutes.
MenuPositionMenuContrast
Short beep
Long beep
Four short
beeps
Two short
beeps
every
fifteen seconds
adjusts: Menu Position
adjusts: Menu Contrast