33
2 ADJUSTMENTS & SETTINGS USING THE SCREENMANAGER
E
Signal
Filter 2 This monitor provides signal filter adjustments
according to the characteristics of each graphics
board for displaying the image properly. If the
characteristics of the graphics board does not
match those of the monitor, the characters and
images displayed may have a couple of bars on
their right side. If these phenomenon is notice-
able, use the “Signal Filter 2” function. Adjust
the percentage until the images seem clear.
Off Timer The Off Timer function allows the user to set the
time in which the monitor will be in operation,
called the “On Period” and automatically shifts
the operation into the “Off Timer Mode” when
the set “On Period” expires. The energy
consumption of the monitor in the “Off Timer
Mode” is as low as the one of the monitor in
“PowerManger Mode 2” although no setting PC
to operate the Off Timer function is required. The
Off Timer will work while PowerManager is
active, but there would be no advance notice
before the monitor’s power switches off.
This monitor provides signal filter adjustments
according to the characteristics of each graphics
board for displaying the image properly. If the
characteristics of the graphics board does not
match those of the monitor, the characters and
images displayed may have a slight shadow on
their right side (refer to figure below). If these
phenomenon is noticeable, use the “Signal Filter
1” functon. Select from mode 1 or mode 2,
whichever displays the image better.
SignalFilter 1
Function