11
Chapter 1 Introduction
1-3. Controls and Functions

Monitor

14

15

73 62 4 9 10 1211

51 8

13

1 Remote control detector Receives the signal from the remote control.
2 button Displays the volume adjustment menu to volume up or down.
3 button
• Displays/Exits the OSD menu.
• Pressing the button while the OSD menu is displayed retu rns you to the
previous menu status.
4 button
• Used to: select the OSD menu tab; select the set value; or to increase /
decrease the adjustment value.
• Press twice to switch the input signals.
5 button • Displays the Quick-OSD menu.
• Used to select the setting or adjustment items in eac h menu.
6 button Turns the power on or off.
7 Power indicator
Indicates monitor’s operation status.
Blue : Operating
Orange : Standby mode
8 Speaker Outputs audio source.
9 Power connector Connects the power cord.
10 I nput signal connector D-Sub mini 15-pin connector
11 Input si gnal connector BNC connector
12 In put signal connector Pin jack (L, R)
13 Stand*1Used to adjust the hight and angle of the monitor screen.
14 S ecurity lock slot Complies with Kensington’s MicroSaver security system.
15 C able holder C overs the monitor cables.
*1 An optional arm (or an optional stand) can be attached by removing the stand (see “5-1. How to Attach the Optional Arm” (page 22)).