7
Notice for this monitor
This product is suited for displaying surveilla nce camera images.
This product has been adjusted specically for use i n the region to which it was originally shipped. If the product is
used outside the region, it may not operate as specied in the speci cations.
This product may not be covered by warranty for uses other t han those described in this manual.
The specications specied in this manu al are only applicable to signal cables specied by US.
Use optional products manufactured or specie d by us with this product.
As it takes about 30 minutes for the performance of electr ical parts to stabilize, adjust the monitor 30 mi nutes or more
after the monitor power has been turne d on.
In order to suppress the luminosity change caused by long-ter m use and to maintain the stable lumi nosity, use of a
monitor at a lower “Backlight” setting is recommended.
When the screen image is changed after dis playing the same image for extended periods of time, an af terimage may
appear. Use the screen saver or power save function to avoid displaying the same image for extended per iods of time.
Periodic cleaning is recommended to keep the monitor looki ng new and to prolong its operation lifetime (refer to
“Cleaning” (page 8)).
The LCD panel is manufactured using high- precision technology. However, missing pixels or lit pixels may appear on
the LCD panel, this is not malfunction. Percentage of effective pixels : 99.99% or higher.
The backlight of the LCD panel has a xed life span. When the sc reen becomes dark or begins to icker, please
contact your dealer.
Do not press on the panel or edge of the frame strongly, as this may result in the d isplay malfunction, such as the
interference patterns, etc. If pres sure is continually applied to the panel, it may deteriorate or d amage your panel. (If
the pressure marks remain on the panel, leave the monitor w ith a white or black screen. The symptom may disappear.)
Do not scratch or press on the panel with any sharp objects, as t his may result in damage to the panel. Do not attempt
to brush with tissues as this may scrat ch the panel.
When the monitor is cold and brought into a room or the room temperat ure goes up quickly, dew condensation
may occur inside and outside the monitor. In that case, do not tur n the monitor on and wait until dew condensation
disappears, otherwise it may cause some da mages to the monitor.