22 Chapter 5 Reference
Chapter 5 Reference

5-1. How to Attach the Optional Arm

An optional arm (or an optional stand) can be attache d by removing the stand section. Please refer to our
web site for the corresponding optional arm (or optional stand). http://www.eizo.com
ATTENTION
• When at taching an arm or stand , follow the instructions of their u ser’s manual.
• When usi ng another manufacture r’s arm or stand, conrm the followin g in advance and select one conformi ng to
the VESA standard. Use the M4 × 12mm screws supplie d with this monitor.
- Clearance between the screw holes : 100mm × 100m m
- Thickness of plate : 2.6mm
- Strong enough to support weight of the monitor u nit (except the stand) and attachment s such as cables.
• When usi ng an arm or stand, atta ch it to meet the following tilt angles of the monitor.
- Up 60 degrees, down 45 degrees (horizont al display)
- Up 45 degrees, down 45 degrees (vertical display, 90 degrees clockw ise)
• Connect t he cables after attaching a n arm or a stand.
• Since the monit or and arm are so heavy, dropping the m may result in injury or equipme nt damage.
[Attachment Procedure]
1 Lay the LCD monitor on a soft cloth spread over on a stable surface with the
panel surface facing down.
2 Remove the stand.
Prepare a screwdriver. Unscrew the four screws securi ng the unit and the stand with the screwdriver.
3 Attach the monitor to the arm or stand.
Secure the monitor to the arm or stand usi ng the screws specied in the user’s manual of the arm or stand.