2-2. Getting Ready for Operation

Try each setting procedure if necessary in the following cases.

1. The display image size and/or position is incorrect

ÆPress the AUTO-SIZING button on the front panel.

The AUTO-SIZING function centers the displayed image, aligning the image’s borders with respect to the monitor frame. In general, press the AUTO-SIZING button whenever changing the graphics board or the resolution p.25), or when image size and/or position is incorrect.

2. The display area is too large or too small

ÆReadjust the refresh rates.

Readjust the preferred refresh rates in accordance with the following look-up- table. Refer to the PC or graphics board manuals on how to change the refresh rates.

[The maximum (non-interlaced) vertical refresh rates for the model]

Maximum Vertical Refresh rate (Hz)

640x480

800x600

1024x768

1280x1024

1600x1200

1600x1280

1920x1440

2048x1536

 

 

 

 

 

 

 

 

160

160

160

121

104

97

86

80

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•About Plug & Play of the monitor

When your computer and display support VESA DDC, the suitable resolution and the refresh rate are set by just plugging your display into the computer without any manual settings.

When your computer system supports Plug & Play, the Display Information File is not required except for installing the Color Profile.

3.Further adjustment is required

Æ Adjust the screen using the ScreenManager (See page 14).

12 2. INSTALLATION