English

3.Turn on the monitor’s main power and then switch on the PC’s power.

The monitor’s power indicator will light up (blue).

If an image does not appear, refer to the “6. TROUBLESHOOTING” (p. 30) for advice.

Whenever finished, turn off the PC and the monitor.

NOTE

zAdjust brightness of the screen depending on the brightness of your environment. Too dark or too bright of a screen can cause eyestrain.

zBe sure to take adequate rests. A 10-minute rest period each hour is suggested.

2-3. Connecting Two PCs to the Monitor

Two PCs can be connected to the monitor through the DVI and the D-Sub mini 15 pin connector on the back of the monitor.

Selecting the Active Input

The Input signal selection button on the front panel can be used to select either DVI or D-Sub as the active input at any time. Every time the button is pressed, the input changes. When switching the signal, the kind of the input signal (Analog or Digital) is displayed for a few seconds on the right top corner of the screen.

Input Signal Selection Button

2-4. Sound Connections

NOTE

zAlways switch the monitor and audio devices or computers off whenever connecting or disconnecting any audio devices (computer or CD player) to the monitor.

zUse the enclosed stereo mini-jack cable for connecting audio devices or computers to the monitor.

1.Connect the stereo mini-jack cable to the external line in of the monitor.

2. CABLE CONNECTION 15