English
To restore the changed brightness and the color caused by long use to close to those original ones.
→
Execute the <Color Restoration>.
The changed brightness and the color caused by long use can be corrected and restored to close to those factory default settings.
[Adjustment Procedure]
(1)Execute the <Color Restoration>. (The operation takes about one minute.)
(2)When color restoration is completed, the original ScreenManager menu is displayed.
NOTE
•Allow the monitor to stabilize for at least 60 minutes before executing this function. Otherwise, the warning message “Warming up!” will appear on the screen.
•Execute this function in every fixed time (ex. 2000 hours usage), so that you can keep stable brightness and
•The total usage time (in hour) can be checked as the <Information> in the <Others> menu.
<Custom> mode: to adjust each color, (Red, Green and Blue)
→Adjust the < 
Gain (p. 33)>, < 
Cutoff (p. 33)>
Change the <Color Mode> to <Custom>. The values shown in percentages (%) for both the Cutoff and Gain are available only as a reference tool.
[Adjustment Procedure]
(1)First, set the monitor to maximum contrast and brightness.
(2)<Temperature> Set the color temperature that is close to the desired color.
(3)Adjust each color to become a uniform black level by using the <Cutoff> function.
(4)Adjust each color to the desired white level by using the <Gain> function.
(5)Select <Save> and then press the Enter key. (The adjustment data will be lost, if the monitor is turned off without saving changes).
<sRGB> mode: To select sRGB
→Select the <sRGB > in < Color Mode>.
During selecting the <sRGB>, color, brightness and contrast cannot be adjusted. Likewise, Fine Contrast Mode can not be changed by the AUTO/FINE MODE button.
3. SCREEN ADJUSTMENT 17