English

Problems

Points to check with possible solutions

16. USB Function cannot be setup

Check that the USB cable is correctly connected.

 

Check that the PC and USB compliant. (Please

 

consult the manufacturer of each device about

 

USB support.)

 

When using the Windows 98 or later, check the

 

BIOS setting of the PC for the USB. (Refer to

 

the PC manual for details.)

 

 

How to adjust the <Uniformity>

Reduce color uniformity errors at the edges of the screen caused by interference from the geomagnetic field.

[Adjustment Procedure]

(1)<Standard>

Select the direction the monitor is facing. Select from the N, NE, E, SE, S, SW, W, NW and Center (no correction). The “point” may be different depending on the environment. Select the “Point” that the maximal brightness and whiteness is uniformed.

If the uniformity is corrected, continue on to (4). If some color patches remain in the corners after the adjustment, continue on to (2).

(2)<Top/Bottom>

Adjust the top/bottom uniformity.

(3)<Top corner><Bottom corner>

Adjust the uniformity of the for 4 edges of the screen. Be sure to adjust the “Top corner” first, then adjust the “Bottom corner”.

Top

Bottom

Menu

Control pad

Uniformity

Top corner

left/right

Left upper

 

 

 

 

up/down

Right upper

Bottom corner

left/right

Left lower

 

 

 

 

up/down

Right lower

(4)<Save>

Select “Save” and the press the enter button. (If the settings are not saved, all adjustments will be lost.)

NOTE

•<Reset>

Resets the uniformity function to the factory default setting.

28 5. TROUBLESHOOTING