English

4. ADJUSTMENTS & SETTINGS

4-1. Brightness Adjustment

The brightness of the entire screen can be set to a desired level.

[Procedure]

(1)Select <Brightness> in the ScreenManager <Mode> menu.

(2)Make adjustments with the Left and Right directing switches.

The Left directing switch makes the screen darker, and the Right directing switch makes it brighter.

NOTE

Selecting <Reset> in the <Mode> menu resets the brightness of the selected CAL Switch mode to the factory default setting.

4-2. Image Adjustments

When a low-resolution image is displayed, the brightness of the border area surrounding the image (i.e., the dark area where no image appears) can be adjusted.

Border

[Procedure]

(1)Select <Border> in the ScreenManager <Others> menu.

(2)Make adjustments with the Left and Right directing switches. The Left directing switch makes the border darker, and the Right directing switch makes it brighter.

4-3. Power-save Setup

Use the <PowerManager> menu in the ScreenManager to configure the power-save setup. This monitor complies with the “DVI DMPM” (see p. 33).

NOTE

Do your part to conserve energy, turn off the monitor when you are finished using it. Disconnecting the monitor from the power supply is recommended to save energy completely.

Even if the monitor is in power-saving mode, USB compliant devices draw power when they are connected to the monitor's USB ports (both upstream and downstream). Therefore, the monitor's power consumption will change according to which devices are connected, even if the monitor is in power-saving mode.

4. ADJUSTMENTS & SETTINGS 21