English
4. ADJUSTMENT
The monitor displays the digital input image correctly based on its
4-1. Screen Adjustment
Screen adjustments for the LCD monitor should be used in suppressing screen flickering and also for adjusting the screen to its proper position. There is only one correct position for each display mode. It is also recommended to use the ScreenManager function when first installing the display or whenever changing the system.
Adjustment Procedure
NOTE
•Allow the LCD monitor to stabilize for at least 20 minutes before making image adjustments.
1. Push the Auto adjustment button on the front panel.
The message “Your setting will be lost, if you press again now.” appears and remains on the screen for 5 seconds. While the message is on the screen, push the Auto adjustment button again to automatically adjust the clock, phase, and screen position. If you do not wish to do adjust the screen, do not push the Auto adjustment button again.
If the appropriate screen can not be made by using the Auto adjustment button, adjust the screen through the following procedures. If the appropriate screen can be made, proceed to step 4.
2. We recommend setting the desktop pattern to that as shown in the diagram below.
NOTE
•More precise adjustment is available for using the “Screen Adjustment program” utility software. It can be downloaded from the EIZO homepage (http://www.eizo.com/).
20 4. ADJUSTMENT