Eizo L565 manual 29

			English
		Problems	Points to check with possible solutions
3.	Display position is incorrect.		Adjust the image position using the <Position>
			(p.21)
			The two display modes, VGA 720 x 400 (70
			Hz) and 320 x 200 (70 Hz), have the same
			signal timings. Using this adjustment selects the
			appropriate display mode. (This function effects
			only when the resolution is VGA 720 x 400 (70
			Hz) or 320 x 200 (70 Hz).
			If the problem persists, use the graphics board’s
			utility software to change the display position if
			available.
4.	Vertical bars of distortion appear.		Decrease the vertical bars using the <Clock>.
			(p.21)

5. Horizontal bars of distortion appear.	Decrease the horizontal bars using the <Phase>.
	(p.21)

6.	Letters and lines appear blurred.	Switch the <Smoothing> mode to “Off”. (p.22)
7.	The screen is too bright or too dark.	Adjust the <Contrast and brightness> (The
		baklight of the LCD monitor has a fixed life
		span. When the screen becomes dark or begins
		to flicker, please consult your dealer.)
8.	Afterimages appear.	When the screen image is changed after
		displaying the same image for a long period, an
		afterimage may appear. The “Afterimage” can
		be removed gradually by changing the displayed
		image.Use the “Off Timer” function and avoid
		keeping the screen on all the time.(p.18)
9.	The screen has defective pixels	This is due to the characteristics of the panel
	(e.g. slightly light or dark).	itself, and not the LCD product.

6. TROUBLESHOOTING 29