Eizo L761T-C 5. ATTACHING A STAND

English

5. ATTACHING A STAND 25

5. ATTACHING A STAND

The LCD monitor can be used with other stand by removing the tilt stand and attaching

the stand to the LCD monitor.

NOTE

• When attaching an arm or stand, follow the instructions of their user’s manual.

• When using another manufacturer’s arm or stand, confirm the following in advance

and select one conforming to the VESA standard.

- Clearance between the screw holes: 100 mm x 100 mm

- Thickness of plate: 2.6 mm

- Strong enough to support weight of the monitor unit (except the stand) and

attachments such as cables.

• Attach an arm or stand to meet the following tilt angles of the monitor.

- Up 45 degrees, down 0 degrees (Within operating range)

• Please connect cables after attaching a stand.

Setup Procedure

1. Lay the LCD monitor down. Do not scratch the panel.

2. Remove the tilt stand by loosening the 4 screws.

3. Attach a stand to the LCD monitor securely with the same screws.

4 Mounting Screws: M4 x 12 mm

stand

Contents

Main For U.S.A, Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity Canadian Notice Users Manual 2 SAFETY SYMBOLS TABLE OF CONTENTS 4 PRECAUTIONS IMPORTANT [Location of Caution Statement] [Symbol on the Unit] OK 6 OK WARN ING CAUTION 8 Notice for this monitor To use the monitor comfortably 1. INTRODUCTION 1-1. Features 1-2. Package Contents English 10 1-3. Controls & Connectors (8) (2) (6) (7) (3) (4) (5) Front 11 1. INTRODUCTION Rear (14) (15) (13) 2. CABLE CONNECTION 2-1. Before connecting Analog Input Digital Input 13 2-2. Connecting the signal cable 1. 1. 2. Power Co rd 5. USB Cable and the other end of the cable into the video connector on the PC. 2. monitor. Then, plug the other end of the cord into a power outlet. 3. power. 4. 2-3. Touch Operation 2-4. Connecting two PCs to the monitor Selecting the active input 16 3. ScreenManager 3-1. How to use the ScreenManager 1. 2. 3. 3-2. Adjustments and Settings 18 3-3. Useful Functions Adjustment Lock Off Timer 19 EIZO Logo display Automatically selecting the input signal function Connecting two PCs to the monitor 20 4. ADJUSTMENT 4-1. Screen Adjustment Adjustment Procedure 1. 2. diagram below. 3. 22 4. Use the <Range Adjustment> (p.35). 5. resolutions. Switch the <Smoothing> setting. 4-2. Color Adjustment Adjustment Contents 24 5. ATTACHING A STAND Setup Procedure 1. 2. 3. 26 6. TROUBLESHOOTING Page 28 Page 30 7. CLEANING Cabinet Panel English 8. SPECIFICATIONS 8. SPECIFICATIONS 32 English 8. SPECIFICATIONS Pin Assignment D-Sub mini 15 pin connector DVI-D Connector USB Port 9. GLOSSARY Clock Temperature DVI (Digital Visual Interface) Gain Page i APPENDIX/ANHANG/ANNEXE EMC Information CAUTION Guidance and manufacturers declaration - electromagnetic emissions Emission test Compliance Electromagnetic environment - guidance Guidance and manufacturers declaration - electromagnetic immunity Immunity test IEC60601 test level Compliance level Electromagnetic environment - guidance Guidance and manufacturers declaration - electromagnetic immunity Immunity test IEC60601 test level Compliance level Electromagnetic environment - guidance