Eizo L761T-C EMC Information

EMC Information

Essential performance of FlexScan L761T-C is to display images and operate functions normally.

CAUTION

The FlexScan L761T-C requires special precautions regarding EMC and need to be installed, put

into service and used according to the following information.

Do not use any cables other than the cables that provided or speciﬁed by us.

Using other cables may cause the increase of emission or decrease of immunity.

Do not put any portable and mobile RF communications equipment close to the FlexScan L761T-C.

Doing so may affect the FlexScan L761T-C.

The FlexScan L761T-C should not be used adjacent to or stacked with other equipment. If adjacent

or stacked use is necessary, the equipment or system should be observed to verify normal

operation in the conﬁguration in which it will be used.

Guidance and manufacturer’s declaration - electromagnetic emissions

The FlexScan L761T-C is intended for use in the electromagnetic environment speciﬁed below.

The customer or the user of the FlexScan L761T-C should assure that it is used in such an environment.

Emission test Compliance Electromagnetic environment - guidance

RF emissions

EN55011

Group 1 The FlexScan L761T-C uses RF energy only for its internal

function.

Therefore, its RF emission are very low and are not likely to cause

any interference in nearby electronic equipment.

RF emissions

EN55011

Class B The FlexScan L761T-C is suitable for use in all establishments,

including domestic establishments and those directly connected

to the public low-voltage power supply network that supplies

buildings used for domestic purposes.

Harmonic emissions

EN61000-3-2

Not applicable

Voltage ﬂuctuations /

ﬂicker emissions

EN61000-3-3

Complies

Contents

Main For U.S.A, Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity Canadian Notice Users Manual 2 SAFETY SYMBOLS TABLE OF CONTENTS 4 PRECAUTIONS IMPORTANT [Location of Caution Statement] [Symbol on the Unit] OK 6 OK WARN ING CAUTION 8 Notice for this monitor To use the monitor comfortably 1. INTRODUCTION 1-1. Features 1-2. Package Contents English 10 1-3. Controls & Connectors (8) (2) (6) (7) (3) (4) (5) Front 11 1. INTRODUCTION Rear (14) (15) (13) 2. CABLE CONNECTION 2-1. Before connecting Analog Input Digital Input 13 2-2. Connecting the signal cable 1. 1. 2. Power Co rd 5. USB Cable and the other end of the cable into the video connector on the PC. 2. monitor. Then, plug the other end of the cord into a power outlet. 3. power. 4. 2-3. Touch Operation 2-4. Connecting two PCs to the monitor Selecting the active input 16 3. ScreenManager 3-1. How to use the ScreenManager 1. 2. 3. 3-2. Adjustments and Settings 18 3-3. Useful Functions Adjustment Lock Off Timer 19 EIZO Logo display Automatically selecting the input signal function Connecting two PCs to the monitor 20 4. ADJUSTMENT 4-1. Screen Adjustment Adjustment Procedure 1. 2. diagram below. 3. 22 4. Use the <Range Adjustment> (p.35). 5. resolutions. Switch the <Smoothing> setting. 4-2. Color Adjustment Adjustment Contents 24 5. ATTACHING A STAND Setup Procedure 1. 2. 3. 26 6. TROUBLESHOOTING Page 28 Page 30 7. CLEANING Cabinet Panel English 8. SPECIFICATIONS 8. SPECIFICATIONS 32 English 8. SPECIFICATIONS Pin Assignment D-Sub mini 15 pin connector DVI-D Connector USB Port 9. GLOSSARY Clock Temperature DVI (Digital Visual Interface) Gain Page i APPENDIX/ANHANG/ANNEXE EMC Information CAUTION Guidance and manufacturers declaration - electromagnetic emissions Emission test Compliance Electromagnetic environment - guidance Guidance and manufacturers declaration - electromagnetic immunity Immunity test IEC60601 test level Compliance level Electromagnetic environment - guidance Guidance and manufacturers declaration - electromagnetic immunity Immunity test IEC60601 test level Compliance level Electromagnetic environment - guidance