English

[Power Resumption Procedure]

Press the Power button.

NOTE

zThe off timer function works while the PowerManager is active, but there is no advance notice before the monitor’s power is switched off.

EIZO Logo Disappearing Function

When switching on the power button on the front panel, the EIZO logo is displyed for a while. If you desire to display or undisplay this logo, use this function. (Default is logo appearing.)

[To undisplay]

Switch off the monitor’s power by the power button, then hold down the Enter button once again and turn the power back on.

[To display]

Switch off the monitor’s power by the power button, then hold down the Enter button once again and turn the power back on.

Automatically Selecting the Input Signal Function

The monitor will automatically detect the inputted signal of either the connection for display. (Default: this function is set (“Auto”).)

NOTE

zConnecting Two PCs to the Monitor

When the one computer is switched off or entering the power saving mode, the monitor will automatically display the other signal.

Use the ScreenManager to switch the input selection to manual.

[Procedure]

(1)Select <Input Signal> in the <Others> menu.

(2)Select <Manual>.

20 3. SCREENMANAGER