English

 

 

 

 

 

 

 

Problems

Points to check with Possible Solutions

 

 

 

 

3. Display position is incorrect.

† Adjust the image position using the <Position>

 

 

(p. 23).

†The two display modes, VGA 720 x 400 (70 Hz) and 320 x 200 (70 Hz), have the same signal timings. Using <VGA Selection> selects the appropriate display mode. (This function effects only when the resolution is VGA 720 x 400 (70 Hz) or 320 x 200 (70 Hz).

†If the problem persists, use the graphics board’s utility software to change the display position if available.

4.Vertical bars of distortion appear. † Decrease the vertical bars using the <Clock>

(p. 22).

5. Horizontal bars of distortion

�� Decrease the horizontal bars using the

appear.

<Phase> (p. 23).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6.Letters and lines appear blurred. † Switch the <Smoothing> (p. 24) mode to “Off”.

7.

The screen is too bright or too

† Adjust the <Brightness> (The backlight of the

 

dark.

LCD monitor has a fixed life span. When the

 

 

screen becomes dark or begins to flicker,

 

 

please contact your dealer.)

 

 

 

8.

Afterimages appear.

† Do you use the screen saver or timer when

 

 

displaying the same image for extended

 

 

periods of time?

 

 

† Afterimages are particular to LCD monitors.

 

 

Avoid displaying the same image for extended

 

 

periods of time.

 

 

 

9.

The screen has defective pixels

† This is due to the characteristics of the panel

 

(e.g. slightly light or dark).

itself, and not the LCD product.

 

 

 

10.

Fingerprints remain on the

† Leaving the screen white may solve the

 

screen.

problem.

 

 

 

11.

The <Smoothing> cannot be

† <Smoothing> is disabled when the screen is

 

selected.

displayed in the 1280 x1024.

6. TROUBLESHOOTING 31