English
7. TROUBLESHOOTING 41
7. TROUBLESHOOTING
If a problem persists even after applying the suggested remedies, contact an EIZO dealer.
zNo picture problems → See No.1 ~ No.2
zImaging problems → See No.3 ~ No.13
zOther problems → See No.14 ~ No.17
zUSB problems → See No.18 ~ No.19
Problems Points to check with Possible Solutions
1. No picture
zIndicator status: Off
Check that the power cord is correctly connected.
If the problem persists, turn off the monitor power
for a few minutes, then turn it back on and try
again.
zIndicator status: Blue
zIndicator status: Yellow
Check the “Gain” setting.
Switch the signal input by pressing the Input
Signal Selection Button on the front control panel.
Try pressing a key on the keyboard, or clicking
the mouse. (p.35)
zIndicator status: Slowly
flashing Yellow
Try pressing the Power Button.
zIndicator status: Flashing
Yellow (twice for each)
Try turning the PC on.