Eizo L797-U, FlexScan Color LCD Monitor 8. CLEANING

English

8. CLEANING 45

8. CLEANING

Periodic cleaning is recommended to keep the monitor looking new and to prolong its

operation lifetime.

NOTE

zNever use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol),

abrasive cleaners, or other strong solvents, as these may cause damage to the

cabinet or LCD panel.

Cabinet

To remove stains, wipe the cabinet with a soft, lightly moistened cloth using a mild

detergent. Do not spray wax or cleaner directly into the cabinet. (For details, refer to

the manual of the PC.)

LCD Panel

zThe LCD surface can be cleaned with a soft cloth, such as cotton or lens paper.

zIf necessary, stubborn stains can be removed by moistening part of a cloth with

water to enhance its cleaning power.

Contents

Main For U.S.A, Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity Canadian Notice Page SAFETY SYMBOLS WARNING CAUTION TABLE OF CONTENTS 4 PRECAUTIONS IMPORTANT! [Location of the Caution Statements] OK OK 6 CAUTION OK 8 LCD Panel 1. INTRODUCTION 1-1. Features 1-2. Package Contents 10 1-3. Controls & Connectors Front 1. INTRODUCTION 11 Rear 12 2. CABLE CONNECTION 2-1. Before Connecting 2. CABLE CONNECTION 13 2-2. Connecting the Signal Cable (For the computer employing D-Sub or DVI connector) zBe sure that the power switches of both the PC and the monitor are OFF. 1. and the other end of the cable into the video connector on the PC. After connecting, secure the connection with the screw-in fasteners. 14 2. 3. 4. WARNING 5. 6. 16 2-3. Connecting the Signal Cable (For the computer employing ADC) 1. and the other end of the cable into the video connector on the PC. To Input the Signal Through ADC 2. 3. of the monitor. 4. WARNING 18 5. button. 6. Selection menu to ADC. 2-4. Connecting Two PCs to the Monitor Connecting Examples DVI-I Input Connector (SIGNAL 1)(SIGNAL 2) 20 Selecting the Active Input The Priority Input Signal 3. SCREENMANAGER 3-1. How to use the ScreenManager 1. 2. 3. 3-2. ScreenManager Adjustments and Settings. 3. SCREENMANAGER 23 24 3-3. FineContrast To select the Mode Exit FineContrast Mode Color adjustment of the mode settings 3-4. Useful Functions Adjustment Lock Off Timer 26 Power Indicator Setting EIZO Logo Disappearing Function 4. ADJUSTMENT 4-1. Screen Adjustment Adjustment Procedure 1. 28 2. 3. Page 30 4. Use the <Range Adjustment> (p. 50) of <Screen> menu. 4-2. Displaying Low Resolutions 1. 2. Page 4-3. Color Adjustment Adjustment items 34 Adjustment Contents 4-4. Power-save Setup To use the PCs Power Saving System (VESA DPMS ). 36 5. MAKING USE OF USB (UNIVERSAL SERIAL BUS) Required system environment Connecting to the USB HUB 1. first, then turn on the PC. 38 3. 6. ATTACHING AN ARM Setup Procedure 1. rightward or leftward to remove the mounting cover. Page 7. TROUBLESHOOTING 42 7. TROUBLESHOOTING 43 44 8. CLEANING Cabinet LCD Panel 46 9. SPECIFICATIONS 9. SPECIFICATIONS 47 Default settings Beeper settings 48 Dimensions USB Port Pin Assignment DVI-I Connector 10. GLOSSARY 50 APPENDIX/ANHANG/ANNEXE i APPENDIX/ANHANG/ANNEXE ii