English

The priority input signal

This function is used to select which PC will have priority to control the monitor when utilizing two PCs. The monitor constantly checks the input signals and switches automatically in accordance with the “Input Priority” setting (see table below). Once a priority is set, whenever a change of signal is detected at the selected input, the monitor will switch the input to that signal.

In the case of only one signal being present at either input, the monitor automatically detects and displays that signal.

Priority

Performance

setting

 

 

If signals from both inputs are present, the monitor gives preference to Signal

 

1 in the following cases.

Signal 1

When the power of the monitor is turned ON

 

When the signal input to Signal 1 is changed even if active input was Signal

 

2.

 

 

 

If signals from both inputs are present, the monitor gives preference to Signal

 

2 in the following cases.

Signal 2

When the power of the monitor is turned ON

 

When the signal input to Signal 2 is changed even if active input was Signal

 

1.

 

The monitor will not detect signals automatically in this mode. Select the

Manual

active input by pressing the input signal selection button on the monitor’s

 

front panel.

 

 

NOTE

When the Signal 1 or Signal 2 is selected, the power saving mode of the monitor activates only if both PCs are in power saving mode.

2. CABLE CONNECTION 17