English
NOTE
•If the user’s operating system has no utility disk (e.g. OS/2), we recommend setting the desktop pattern to that as shown in the diagram on the following.
3. Adjust by using <Screen> menu in the ScreenManager.
(1) Vertical bars appear on the screen
→
Use the <Clock> (p.44) adjustment.
Select the “Clock” and eliminate the vertical bars by using the right and left of the control buttons. Do not continuously press the control buttons, as the adjustment value will change quickly and make it difficult to locate the most suitable adjustment point.
If the horizontal flickering, blur or bars appear, proceed to “Phase” adjustment as follows.
NOTE
•When adjusting the <Clock>, the horizontal screen size will also change.
(2) Horizontal flickering, blurring or bars appear on the screen.
→
Use the <Phase> (p.45) adjustment.
Select the <Phase> and eliminate the horizontal flickering, blurring or bars by using the right and left buttons.
NOTE
•Horizontal bars may not completely disappear from the screen depending on the PC.
4. ADJUSTMENT 25