Prior to use

Installation

Setting/Adjustment

Troubleshooting

Connecting Cables

Attention

When replacing the current monitor with an M1700/M1900 monitor, be sure to change the PC settings for resolution and vertical frequency to those which are available for the M1700/M1900 monitor referring to the resolution table (back of cover page) before connecting the PC.

NOTE

To use speaker, connect a stereo mini-jack cable to the Audio output terminal on a PC or CD player.

When connecting two PCs to the monitor, refer to the User’ s Manual on the CD-ROM.

1 Check that the monitor and the PC are powered off.

2 Connect the monitor to the PC with a signal cable that matches the connectors.

After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.

CD player etc

English

Connectors on the

PC

Audio output terminal

(Stereo mini-jack)

DVI-I connector

D-sub mini 15-pin

connector

D-sub 15-pin

connector

Audio output terminal

(Stereo mini-jack)

Stereo Mini-jack cable (supplied)

Signal cable FD-C39 (supplied)

Digital connection

Signal cable MD-C87 (supplied)

Analog connection

Macintosh Adaptor (optional) and signal cable MD-C87 (supplied)

Analog connection

Connectors on the

monitor External line in

(Stereo mini-jack)

DVI-D connector

D-sub mini 15-pin

connector

3 Plug the power cord into a power outlet and the Power connector on the monitor.

Adjusting Screen Height and Angle

Adjust the screen height, tilt and swivel the screen to the best condition for working.

3