Eizo M1900 English, 1. Check the Power indicator, 2. Check the error message that remains on the screen for 40 seconds

English

Prior to use Installation Setting/Adjustment Troubleshooting

No-Picture Problem

If no picture is displayed on the monitor even after the following remedial action is taken, contact your local dealer.

1. Check the Power indicator.

Symptom	Status	Possible cause and remedy
No picture	Power indicator does not light	Check whether the power cord is correctly
	up.	connected. If the problem persists, turn off the
		monitor for a few minutes, and then turn it on
		again.
	Power indicator lights blue.	Check the brightness setting.
	Power indicator lights yellow.	Switch the input signal with	.
		Press a key on the keyboard or click the mouse.
		Turn on the PC.

2. Check the error message that remains on the screen for 40 seconds.

These messages appear when the input signal is incorrect even if the monitor is functioning.

Symptom	Status	Possible cause and remedy
	The input signal is not received	Check whether the PC is turned on.
	correctly.
		Check whether the signal cable is properly
		connected to the PC.
		Switch the input signal with	.
	The signal frequency is outside	Change the mode to an appropriate mode using
	the specification. Incorrect	the graphics board’s utility software. Refer to the
	signal frequency is shown in	manual of the graphics board for details.
	red.

6