10
2. Installation
2. Installation

2-1. Connecting Two PCs to the Monitor

Two PCs can be connected to the monitor through the DVI-I connector on the back of the monitor.

Connection examples

PC 1 PC 2
(Ex.1) Digital DVI
Signal Cable
(FD-C39 enclosed)
Signal Cable
(FD-C16 enclosed) D-Sub
mini 15
pin
Analog
(Ex.2) Analog
D-Sub
mini 15
pin
Signal Cable
(FD-C16 enclosed)
Signal Cable
(FD-C16 optional) D-Sub
mini 15
pin
Analog

Selecting input signal

Switch the input signal with . Input signal switches each time is pressed. When the signal is
switched, the active signal type (Signal 1 or 2/ Analog or Digital) appears at the top right corner of the
screen for two seconds.

To set auto-switching of input signals [Input Signal]

The monitor recognizes the connector through which PC signals are input.
When either PC is turned off or enters the power-saving mode, the monitor automatically displays signals
of another PC.
Prioritysetting Function
Auto When either PC is turned off or enters the power-saving mode, the monitor
automatically displays signals of another PC.
Manual The monitor does not detect the PC’s signals automatically. Select an active input
signal with .

[Input signal setting]

1. Choose <Others> from the Adjustment menu, and press .
2. Choose <Input Signal> from the <Others> menu, and press .
The <Input Signal> menu appears.
3. Select "Auto" or "Manual" with or , and press .
The Input Priority setting is completed.
SIGNAL1 SIGNAL2
Input Signal Selection button