Eizo MX240W 3-7. Power Indicator Setting, 3-8. Automatic brightness adjustment

3. Screen Adjustment and Settings

3-7. Power Indicator Setting

Light off the power indicator. This function is available for the multiple panels settings.

[Procedure]

1. Select <Power Indicator> in the Adjustment menu <Others> menu.

2. Select "Disable".

3-8. Automatic brightness adjustment

The sensor on the front side of the monitor detects the environmental brightness to adjust the screen

brightness automatically and comfortably.

[Procedure]

1. Select <BrightRegulator> in the Adjustment menu <Others> menu.

2. Select "Enable".

NOTE

• This function is not available in the DICOM-CL and CAL modes.

Contents

Main Important SAFETY SYMBOLS CAUTION PRECAUTIONS IMPORTANT! [Location of the Caution Statements] OK WARNING CAUTION LCD Panel To use the monitor comfortably 1. Introduction 1-1. Features 1-2. Buttons and Indicators 2 9 1-3. Utility Disk 2. Installation 2-1. Connecting Two PCs to the Monitor Connection examples Selecting input signal To set auto-switching of input signals [Input Signal] 2-2. Making Use of USB (Universal Serial Bus) 3. Screen Adjustment and Settings 3-1. Basic Operation and Functions Entering the Adjustment menu Making Adjustments and Settings Exiting the Adjustment menu. Functions 3-2. Screen Adjustment Analog Input Adjustment Procedure Press on the control panel. Run the "Screen Adjustment Program". Adjust by using <Screen> menu in the Adjustment menu. Adjust the output signal range (Dynamic Range) of the signal. 3-3. Color Adjustment Simple adjustment [CAL Switch mode] To select CAL Switch mode Exit CAL Switch Mode Advanced Adjustments[Adjustment menu] Page 3-4. Power-save Setup Analog Input [Power Saving System] Digital Input [Power Saving System] 3-5. Off Timer 3-6. Locking the settings [How to lock] [How to unlock] 3-7. Power Indicator Setting 3-8. Automatic brightness adjustment 3-9. Displaying Lower Resolutions Enlarge the screen size when displaying a low resolution. Smooth the blurred texts of the enlarged screen. Set the brightness of the black area surrounding the displayed image. 3-10. Setting the orientation of the Adjustment menu 3-11. EIZO Logo Appearing Function [To undisplay] [To display] 4.Troubleshooting 4. Troubleshooting Problems Possible cause and remedy 4. Troubleshooting Problems Possible cause and remedy 5. Reference 5-1. Attaching an arm Setup Procedure Lay the LCD monitor down. Do not scratch the panel. Remove the tilt stand by loosening the screws. 5-2. Cleaning 5-3. Specications 5. Reference Default settings Dimensions 5. Reference Pin Assignment Pin No. Signal Pin No. Signal Pin No. Signal No. Signal Remarks 5-4. Glossary Page 6. APPENDIX/ANHANG/ANNEXE 6. APPENDIX/ANHANG/ANNEXE 6. APPENDIX/ANHANG/ANNEXE Page For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity Canadian Notice