English

2-2. Connecting the signal cable

NOTE

ξ Be sure that the power switches of both the PC and the monitor are OFF.

1. Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC.

After connecting, secure the connection with the screw-in fasteners.

 

 

Power Cord

Analog Input

 

 

Signal Cable

Connector

PC

Signal Cable (FD-C16 enclosed)

Video Output

Analog graphics board

 

Connector D-Sub

 

 

mini 15 pin

 

[BNC cable]

BNC connection is available when using the optional adapter.

Optional Adaptor

BI00FM

H, V, G

BNC Cable

Power Cord

 

Signal Cable

Connector

PC

RadiForce BNC Adaptor BI00FM

Video Output

Analog graphics board

(Optional) + BNC cable

Connector /Analog

 

 

 

 

NOTE

ξ In case of connecting to the monochrome graphics card, choose “Monochrome” by the signal select button on the front panel.

2. CABLE CONNECTION 13