English
7. TROUBLESHOOTING
If a problem persists even after applying the suggested remedies, contact an EIZO dealer.
| ξ | No picture problems See No.1 ~ No.2 | |||
| ξ | Imaging problems | See No.3 ~ No.13 | ||
| ξ | Other problems | See No.14 ~ No.17 | ||
| ξ | USB problems See No.18 ~ No.19 | |||
|
|
|
|
|
|
|
| Problems |
| Points to check with possible solutions | |
| 1. No picture |
| Check that the power cord is correctly connected. | ||
| ξ Indicator status: Off |
| If the problem persists, turn off the monitor power | ||
|
| for a few minutes, then turn it back on and try | |||
|
|
|
| ||
|
|
|
| again. | |
|
|
|
|
| |
| ξ Indicator status: Green |
| Check the “Brightness” settings. | ||
| ξ Indicator status: Orange |
| Try pressing a key on the keyboard, or clicking the | ||
|
|
|
| mouse. | |
|
|
|
| (p.26) | |
| ξ Indicator status: Slowly flashing | Try pressing the power button. | |||
| Orange |
|
|
| |
| ξ Indicator status: Flashing Orange | Try turning the PC on. | |||
| (twice for each) |
|
|
| |
|
|
|
| ||
| 2. Error messages shown below will | These messages appear when the signal is not inputted | |||
| remain on the screen for 40 | correctly, even if the monitor functions properly. | |||
| seconds. |
| When the image is displayed correctly after a short | ||
|
|
|
| time, there is no problem with the monitor. (Some | |
|
|
|
| PCs do not output the signal soon after powering | |
|
|
|
| on.) | |
|
|
|
| Check that the PC is turned ON. | |
|
|
|
| Check that the signal cable is properly connected to | |
|
|
|
| the PC or graphics board. | |
|
|
|
| ||
| ξ Whenever an error signal message | Use the graphics board’s utility software to change | |||
| appears, the signal frequency will be | the frequency setting. (Refer to the manual of the | |||
| displayed with blinking. |
| graphics board.) | ||
| (Example: Digital input) |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
7. TROUBLESHOOTING 31