|
|
| English | |
|
|
|
|
|
| Problems |
| Points to check with possible solutions | |
| 19. The <Brightness> cannot be | After the calibration, the brightness adjustment | ||
| selected in FineContrast CAL | function is automatically locked. Please refer to | ||
| mode. | page 34 to unlock. | ||
|
|
|
| |
| 20. Frequency does not change after | Use the graphics board’s utility software to change | ||
| installing “Monitor information | the input signal frequency. | ||
| file” in the attached utility disk |
|
|
|
| on Windows 98/2000/Me/XP. |
|
|
|
|
|
|
| |
| 21. PC is hung up. / The peripherals | Check that the USB cable is correctly connected. | ||
| connected to the downstream | Check the downstream ports by connecting the | ||
| ports do not operate. | peripherals to other downstream ports. If the | ||
|
| problem is solved by doing this, contact an EIZO | ||
|
| dealer. (For details, refer to the manual of the PC.) | ||
|
| Try executing the following method. | ||
|
| - | Restarting the PC | |
|
| - | Connecting the PC and peripherals directly | |
|
| If the problem is solved by doing this, contact an | ||
|
| EIZO dealer. | ||
| 22. USB function cannot be setup. | Check that the USB cable is correctly connected. | ||
|
| Check that the PC and OS are USB compliant. (For | ||
|
| verification of USB support, consult the | ||
|
| manufacturer of each system.) | ||
|
| Check the PC’s BIOS setting for USB. (For details, | ||
|
| refer to the manual of the PC.) | ||
7. TROUBLESHOOTING 43