Eizo RX211 3-4. Adjustment Lock Function

3. Adjustment and Settings

3-4. Adjustment Lock Function

Use the “Adjustment Lock” function to prevent any accidental changes.

Locked functions • Display, adjustment, and setting of the ScreenManager

• Brightness adjustments to the CAL Switch mode

Unlocked function • Selection of the CAL Switch mode with the mode switch

• Input Signal Selection Switch

[How to lock]

1. Turn off the monitor power by touching the power switch.

2. Touch the power switch while touching the enter switch.

[How to unlock]

1. Turn off the monitor power by touching the power switch.

2. Touch the power switch while touching the enter switch, and then turn on the monitor

again. The adjustment lock is released.

NOTE

• The adjustment lock function may activate when calibration is performed with the

calibration kit (RadiCS LE / see Optional, p. 42). The monitor can be unlocked using the

same unlocking procedure described above.

Contents

Main English Deutsch Franais Important Wichtig Important EIZO NANAO CORPORATION EIZO NANAO TECHNOLOGIES INC. EIZO EUROPE AB For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity Canadian Notice Page SAFETY SYMBOLS TABLE OF CONTENTS PRECAUTIONS IMPORTANT! [Location of the Caution Statements] [Symbols on the unit] OK OK Page Notice for this monitor 9 Cleaning [LCD Panel] [Cabinet] To use the monitor comfortably 1. Introduction 1-1. Features 1-2. Package Contents 1. Introduction 11 1-3. Controls and Connectors Front 12 1. Introduction Side / Rear 2. Cable Connection and Screen Adjustment 2. Cable Connection and Screen Adjustment 2-1. Before Connecting Digital Input Resolution Frequency Dot Clock Display mode Portrait Landscape Analog Input 2-2. Connecting the signal cable Page Page 2-3. Connecting Two PCs to the Monitor Selecting the Active Input The Priority Input Signal 2-4. Screen Adjustment (Analog Input) Adjustment Procedure . Adjust the advanced setting by using <Screen> menu in the ScreenManager. Page . Adjust the output signal range (Dynamic Range) of the signal. 3. Adjustment and Settings 3-1. How to use the ScreenManager 22 3. Adjustment and Settings 3-2. ScreenManager menu Functions 23 How to use the ScreenManager [Entering the ScreenManager] [Making adjustments and settings] [Exiting the ScreenManager] 24 Image Rotation Function <Setup>-<Image Rotation> [How to cancel] Mode Preset Function <Setup>-<Mode Preset> [How to cancel] 25 Power Saving Function <PowerManager> 26 Off Timer <Others>-<Off Timer> [Off timer system] [How to restore power] Power Indicator Function <Others>-<Power Indicator > 3-3. CAL Switch Function CAL Switch Modes How to use the CAL Switch Function [Entering the CAL Switch menu] [Selecting the CAL Switch mode] 3-4. Adjustment Lock Function [How to lock] [How to unlock] 4. Color Adjustment and Image Adjustment 4-1. Color Adjustment Available settings Adjustment Contents 4-2. Image Adjustment Changing the Screen Size [Procedure] Smoothing the blurred texts [Procedure] Page 5. Making Use of USB (Universal Serial Bus) Page 6. Attaching an Arm 7. Troubleshooting Page Page Page 8. Specications Composite, TTL, Positive/Negative Signal registration Analog 45 (Factory preset: 30) Digital 10 (Factory preset: 0) Dimensions Default Settings CAL Switch Mode : The default display mode setting is 1-DICOM mode. Brightness Color Temperature Gamma Others Recommended brightness value for each color temperature value Color temperature setting value Adjustable range: from 6500 K to 15000 K or Off Recommended brightness value Optional 43 Pin Assignment DVI-D Connector D-Sub mini 15 pin Connector USB Port 9. Glossary Page i APPENDIX/ANHANG/ANNEXE/ / ii kHz fH : kHz APPENDIX/ANHANG/ANNEXE/ / Mode EMC Information Guidance and manufacturers declaration - electromagnetic emissions Emission test Compliance Electromagnetic environment - guidance Guidance and manufacturers declaration - electromagnetic immunity Immunity test EN60601 test level Compliance level Electromagnetic environment - Immunity test EN60601 test level Compliance level Electromagnetic environment - guidance