
15
Chapter 2 Adjusting Screen
2-3. Color Adjustment
● To select the display mode (CAL Switch)
CAL Switch allows you to select easily the adequate mode suitable for the monitor’s application.
CAL Switch mode
Mode Purpose
1-DICOM Available to display in DICOM mode.
2-Custom Available for the color settings acc ording to your preference.
3-CAL Displays the screen adjusted by calibration software.
4-Text Suitable for displaying texts for word processing or spreadsheets.
The mode menu
appears.
Procedure
Press .
Mode menu appears at the lower left of the scre en.
The mode among the list is highlighted i n turn each time is pressed .
You can switch the current mode with or while the mode menu i s being displayed.
→1-DICOM←→2-Custom←→3- CAL←→4-Text←
NOTE
The Adjustment menu and the Mode menu ca nnot be displayed at the same ti me.
You can disable a specic mode to be selected. For more infor mation, refer to “3-1 Enabling/D isabling Mode
Selection” (page 21).
•
•
● To perform ad vanced adjustments
The <Color> menu of the Adjustment menu allows you to set and save the independent color adjustme nt
for each mode.
Attention
Wait 30 minutes or more from monitor power on before st arting the color adjustme nt.
(Allow the monitor to warm up for at least 30 mi nutes before making adjust ments.)
Perform the range adjustm ent rst when adjusting color for analog i nput signals.
(Refer to “To adjust color gradation automat ically” on page 14).
The same image may be seen in d ifferent colors on multiple monitors due to t heir monitor-specic characte ristics.
Make ne color adjustment visu ally when matching colors on multiple monit ors.
•
•
•
NOTE
The values shown in “%” or “K” are available only a s reference.•
1.
2.