
3
This product is suited to display medical i mages of such modalities as MRI and CT. It does not support the d isplay of
mammography images for diagnosis.
This product has been adjusted sp ecically for use in the region to which it was originally shipp ed. If the product is
used outside the region, it may not operate as specied i n the specications.
This product may not be covered by warrant y for uses other than those described in t his manual.
The specications noted in this ma nual are only applicable for power cords and signal cables specied by us.
Use optional products manufactur ed or specied by us with this product.
As it takes about 30 minutes for the perform ance of electrical parts to sta bilize, adjust the monitor 30 minutes or more
after the monitor power has been tu rned on.
In order to suppress the luminosit y change by long-term use and to maintai n the stable luminosity, use of a monitor in
lower brightness is recommended.
When the screen image is changed af ter displaying the same image for extende d periods of time, an after image may
appear. Use the screen saver or power save function to avoid displaying the same i mage for extended periods of time.
Periodic cleaning is recommended to kee p the monitor looking new and to prolong its operation lifetime. (Refer to
“Cleaning” on the next page.)
The screen may have defective pixels. These pixels may appear as slightly light or da rk area on the screen. This is due
to the characteristics of the panel its elf, and not the product.
The backlight of the LCD panel has a xed life span. W hen the screen becomes dark or begin s to icker, please
contact your dealer.
Do not press on the panel or edge of the frame strongly, as this m ay result in the display malfunct ion, such as the
interference pattern s, etc. If pressure is continually applie d to the LCD panel, it may deteriorate or damage you r LCD
panel. (If the pressure marks re main on the LCD panel, leave the monitor with a white or black screen. The s ymptom
may disappear.)
Do not scratch or press on the panel with any shar p objects, such as a pencil or pen as this may result in d amage to the
panel. Do not attempt to brush with ti ssues as this may scratch the LCD panel.
When the monitor is cold and brought into a room or the ro om temperature goes up quickly, dew condensation
may occur inside and outside the monitor. In that case, do not t urn the monitor on and wait until dew conden sation
disappears, otherwi se it may cause some damages to the monitor.