English
2-2. Connecting the Signal Cable
NOTE
zBe sure that the power switches of both the PC and the monitor are OFF.
1.Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the
Power Cord
Signal Cable | Connector of the PC |
| PC |
Signal Cable (enclosed) | Video Output Connector / | z | Standard graphics card |
| z | Power Macintosh G3 | |
|
| ||
|
|
| (Blue & White) / Power |
|
|
| Mac G4 (VGA) |
Signal Cable (enclosed) + | Video Output Connector / | z | Macintosh |
Macintosh Adapter (Optional) |
|
|
2. CABLE CONNECTION 13