19
Chapter 2 Settings and Adjustments
NOTE
• For default settings, refer to “Main
default settings (factory settings)” on
page 25.
2-11 Selecting Input Signal ● To select input signal [Input Signal]
This function allows you to select the signal displayed on the monitor.
(1) Choose <Other> from the Adjustment menu, and press .
(2) Select <Input Signal> with and , and press .
<Input Signal> menu appears.
(3) Select <Auto/Manual> with or , and press .
2-12 Resumption of Default Setting● To reset color adjustment [Reset]
The hue in the color mode currently set will revert to the default settings (factory
settings).
(1) Choose <Color> from the Adjustment menu, and press .
(2) Choose <Reset> from the <Color> menu and press .
The <Reset> menu appears.
(3) Select <Reset> with or , and press .
The reset operation is completed.
● To reset all settings [Reset]
Reset all adjustments/settings to the factory default settings.
(1) Choose <Others> from the Adjustment menu, and press .
(2) Choose <Reset> from the <Others> menu, and press .
The <Reset> menu appears.
(3) Select <Reset> with or , and press .
The reset operation is completed.
NOTE
• When no input signal is received on
both SIGNAL1 and SIGNAL2 port,
the signal port selecting function is
performed at every two seconds.
SX3031W_UM_EN.indd 19SX3031W_UM_EN.indd 19 5/29/2007 1:46:09 PM5/29/2007 1:46:09 PM