2. Plug the power cord into the power connector at the rear of the monitor. Then, plug the other end of the cord into a power outlet.
WARNING
•Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord.
Not doing so may cause in fire or electric shock.
•The equipment must be connected to a grounded main
outlet.
Not doing so may cause in fire or electric shock.
3. Turn on the monitor first, then the PC.
The monitor’s power indicator will light up (green). The monitor will warm up briefly, then display an image. Whenever finishing your operation, turn off the PC and the monitor.
(If an image does not appear, make sure that all connections have been made properly. Refer to the “TROUBLESHOOTING” (See page 22) for additional advice).
ENGLISH
•Generally, for maximum viewing comfort, position the monitor slightly below eye level. Staring at the monitor for prolonged periods can cause eyestrain. Be sure to take adequate rests.
(A
2. INSTALLATION 11