By using the <Color Mode> in the <Color> menu, the adjustment mode can be selected from standard mode (to set the color temperature, the color correction and the color restration), custom mode (to adjust each color tone, (Red, Green and Blue)) and sRGB mode. These modes allow you to adjust the color settings according to your preference.
<Standard> mode to set the color temperature, the color correction and the color restration
(1) To set the color temperature
Æ
Set the <Temperature>.
Temperature can be set from 4,000 K to 10,000 K, in 500 K increments. (Including the 9,300 K default setting.)
(2)To eliminate disparities in color temperature and brightness due to an irregular video signal output
Æ 
Execute the <Color Correction>.
Color Correction corrects irregular video signal output levels to eliminate disparities in color temperature and brightness. Every time the PC (graphics board) and input signal change, execute color correction.
(1)Open a www browser and the Pattern.html in the EIZO Utility Disk. Then, maximize the window.
(2)Execute the <Color Correction>. All other adjustments are off during the correction. (The operation takes about 20 to 30 seconds. Do not change the “Pattern” during the correction.) When color correction is complete, the result is displayed.
ENGLISH
3. SCREEN ADJUSTMENT 15