Elation Professional 60TM - page 23

Design Wash LED 60™
©Elation Professional, Los Angeles Ca. 23 www.ElationLighting.com
8.2 Information:
8.2.1 Time information
These functions will detail different time functions associated with the fixture.
Current Time
This function displays the running time of the fixture from the last power on. The
display shows “XXXX”, where “XXXX” represents the number of hours the fixture
has been running. This counter is automatically reset after every power-on.
Total Life Hours
This function tracks the total running time of the fixture from the very first start-up.
Where “XXXX” represents the total number of running hours. This time is none
destructive and will remain in the fixtures memory indefinitely.
Last Run Hours
This function tracks the number of hours the fixture was operating on it’s previous
cycle. Where “XXXX” represents the number of hours. This counter is automatically
reset after every power down.
Timer Password
This function allows the last run hours to reset to zero.
Clear Last Run
This function resets the “Last Run Hours” hour calculator. This procedure tracks the
run between service cycles.
• Select “Clear Lamp Run” in the system menu.
• The LCD will display “ON” or “OFF.” Were “ON” will reset the lamp time.
• Enter Password
• Press enter to confirm.
• Press the Mode/Esc-button to return to the main menu.
8.2.2. Temperature Info.
This function will display the internal head temperature of the fixture in real time. The